Use AR view

Before opening AR view

• •Confirm the selected dish location and target.
• •Allow camera access and any platform-required orientation access. Location access is needed only when using Current Location; a committed manual observer can be used without it.
• •Move away from large metal objects, vehicles, loudspeakers, magnets, motors, and energized cabling.
• •Hold the device steadily and give the compass and AR tracking time to settle.

AR view controls

• •Use Current Location or Search to update the observer used by both map and AR.
• •Use the laser beam to draw or remove a line to the selected target.
• •Use split screen to compare the camera view with the map and to correct the heading when that control is shown.
• •Use Snapshot to save the visible AR screen to your photo library or gallery. Grant photo or storage access if prompted.
• •Use Recalibrate AR when the scene is offset, tracking has recovered from an interruption, or the status asks for a reset.

Automatic Map and AR switching

When enabled in Settings, raising the device toward the sky can open AR and lowering it can return to the map. A manual choice is respected until the device crosses the appropriate reset position.